when buying your helmet

IMPORTANT information FOR YOUR SAFETY


FITTING AND SIZING

To put on and take off our helmets, always place the rear strap on the back of the head and slide the helmet on. Only wear helmets of a suitable size; helmets which are either too loose or too tight will restrict movement and will reduce the level of protection. For maximum protection, the helmet must fit firmly on the head and the chin strap and adjustable rear strap must be securely fastened.

The helmet should be a firm but comfortable fit and it should not be possible for the helmet to be removed when pulled at the rear in an upward direction. The sizes of our helmets are marked on a label attached inside and on the front of the box. Masuri helmets are available in the following sizes: Club is available in Boys and Youth, Standard and Large. All other helmets are available in Small Men’s, Standard and Large.

CHOOSING YOUR HEAD PROTECTOR

Your head protector can only protect you if it fits well. Try different sizes and choose the size which feels secure and comfortable on your head. Position any straps so that they do not cover your ears, and adjust straps and fastener until comfortable and firm.

USING YOUR HEAD PROTECTOR

Only use your head protector when playing cricket. It is not designed for other sports or motor vehicle use. Every time you use your head protector, check that nothing is badly worn, torn, cracked or missing.

ATTACHMENT OF FACEGUARD

For your protection, ensure that the faceguard is attached in accordance with the manufacturer’s instructions.

FACEGUARD

This Masuri faceguard is not replaceable.

MAINTENANCE OF HEAD PROTECTOR

Keep your head protector away from chemicals. For example, detergents, petrol, glue and sticky labels. Store it away from heat and sunlight. Chemicals, heat and sunlight can all reduce the strength of your head protector.

For plastic helmets: Clean with a soft cloth and tap water only.

For Fabric covered helmets: To clean, lightly rub with a soft bristle clothes brush.

Do not apply paint, solvents, glue or transfers.

Examine faceguard regularly for broken welds or bent wires and in the event either are found, replace the entire helmet immediately.

REPLACING YOUR HEAD PROTECTOR

Get a new head protector:

a) After a severe impact from a cricket ball.
b) If you can see or feel any damage to any part of the head protector.
c) After a hard knock or squashing it.
d) If it gets badly scratched.
e) If it doesn’t fit you anymore.
f) After 3 years careful use.

YOU CANNOT ALWAYS SEE WHEN IT IS DAMAGED.

PERFORMANCE AND LIMITATIONS OF USE

These products have been tested in accordance with BS7928:2013. Never use the product for any sports other than cricket.

IF YOU NEED ADVICE

If you are ever in any doubt about your head protector, ask your local cricket equipment dealer for advice, or write to the head protector manufacturer or importer.

 

GET IN TOUCH